产品展示 / products 您的位置:网站首页 > 产品展示 > > 探伤仪 > DA400S磁粉探伤仪

产品列表

PROUCTS LIST

DA400S磁粉探伤仪
DA400S磁粉探伤仪

访问量:1777

产品时间:2024-10-06

简要描述:简单介绍
DA400S磁粉探伤仪采用了许多*进技术来形成感应磁场,具有*通用性,固定的AC或DC磁场,用于表面和近表面缺陷的检测,是控制器与固态电子器件为一体的高性能的轻便仪

详情介绍
DA400S磁粉探伤仪的详细介绍

DA400S磁粉探伤仪

美国派克便携式:
    美国PARKER公司磁粉探伤仪DA-400采用了许多*进技术来形成感应磁场,具有*通用性,固定的AC或DC磁场,用于表面和近表面缺陷的检测,是控制器与固态电子器件为一体的高性能的轻便仪。可疳高能磁场集中施加到检测区,快速准确发现材料缺陷。磁极可将AC或DC磁场施加到各种形状工件的检测区域,没有电弧烧伤。

的技术参数:

型号  DA400 DA400S
电源 110VAC 50-60Hz 230VAC 50-60Hz
电流 4A 3A
磁场 交流 交直流
工作周期 2分钟开/关 2分钟开/关
重量 3.68Kg 3.68Kg
尺寸 188*235*54mm  188*235*54mm
磁极间距 0-305mm  0-305mm
电缆 3芯2m长电缆 3芯2m长电缆

DA-400 Series Contour Probes®

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape... in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

  • Versatility and powerful performance in a lightweight (8 lbs.) instrument
  • Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
  • Apply continuous or residual magnetic fields and demagnetize too
  • Use with dry powder, wet fluorescent or visible
  • High impact molded housing
  • One year repair/replacement guarantee

DA-400s Series Contour Probes® SPECIFICATIONS

Electronics Reliable solid state circuitry contained within molded housing
Mechanical capacity Minimum-Maximum distance across poles: 0 to 12"(0-305mm)
Fields – selective AC: constant level
DC: pulsed DC
Flux density approximay 68,000 lines per square inch at 4" pole spacing. (50 pound pull.)
Power source 105-230 VAC, 50-60 Hz, 4 Amps
3-connector power cord and plug.
(Available in export voltages.)
Controls 1   Momentary, push to test
2   AC/DC selector switch
weight 3.4kg
Finish Injection Molded Housing
Glass Filled Nylon®


留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
在线客服 联系方式

服务热线

400-892-6117 021-31268583 021-57631797

Baidu
map